Undelete Plus

Undelete Plus is a quick and effective way to retrieve accidentally deleted files

Undelete Plus is a quick and effective way to retrieve accidentally deleted files, files removed from the Recycle Bin, in a DOS window, from a network drive, from Windows Explorer with the SHIFT key held down.

Undelete Plus supports all Windows file systems for hard and floppy drives including FAT12/16/32, NTFS/NTFS5 and image recovery from CompactFlash, SmartMedia, MultiMedia and Secure Digital cards.

Undelete Plus allows the following actions to be performed:
· Recovery of deleted files from NTFS/NTFS5, FAT12/FAT16/FAT32 volumes.
· Restoring deleted files on Windows 2000, Windows
XP, Windows 98, Windows ME, Windows NT.

Important Information: As soon as you discover that vital files have been erased, the most important thing is to prevent erased files from being rewritten. To do so, avoid any use of the disk where the file was erased until after the files are recovered. Also remember that Undelete Plus shouldn't be installed to this disk - install it to floppy if no other disk is available.

The following three things are important for restoration considerations:
(1) The less time since the disk has been defragmented
(2) the sooner you make a restoration attempt
(3) the smaller the size of the file - the more chances for success we have.

When Undelete Plus saves a restored file it reads its content and writes it to a new file with the same name. It is recommended that you save files on another disk because of the risk of overwriting other erased files with the new saved one.

If you still choose to save files on the same disk from where they were restored, all files will be read from disk to memory and only after that will be written to disk. Then to check the condition of other erased files on disk, it will be re-scanned.
Click to download Undelete Plus

Read More..

RADMINRADMIN is the registered trademark of Famatech International Corporation and its owners 3.0 Remote Control

Radmin 3.0 - Remote Control SoftwareRadmin is fast and secure Remote Access Software, that enables you to work on a remote computer in real time as if you were using its own keyboard and mouse. Try it FREE »

Read More..

resetter canon manual

Canon Waste Ink Tank Reset Procedures

Canon GENERIC "S" SERIES RESET CODE
Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printer's carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
"Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.

++++++++++

Canon i320, i255
Waste Ink Counter Reset.
Step 1 : Manual for service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
or Step 1: Manual for service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

step 2 : Software for Permanant

1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.

Remark "After service mode Pls use software for permanent reset"

++++++++++

Canon PIXMA iP1000
Waste Ink Counter Reset.
Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Software for Permanant

1. Reconnect the printer cable.
2.
Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.

Remark "After service mode Pls use software for permanent reset"

++++++++++

Canon PIXMA iP1500
Waste Ink Counter Reset.
Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Software for Permanant

1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.

Remark "After service mode Pls use software for permanent reset"

++++++++++
Canon i850, i950, S600
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses - light color - function
Number of presses - light color - function

0 presses -
green - Test print (or exit service mode on i960)
1 press -
orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses -
green - EEPROM initialize
3 presses -
orange - Reset waste ink counter


++++++++++
Canon S450 Printer
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7: Press Power to set data

++++++++++
Canon BJC 1000 Serie
1: Remove Cartridge
2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within 5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

++++++++++
Canon BJC-2000 BJC-2100 Serie
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Close Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

++++++++++

Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265
Canon
BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650
Unplug Power Cord
Hold POWER and RESUME buttons
Plug in Power Cord
Release buttons
Open front door of printer
Hold the CARTRIDGE and RESUME buttons
Press POWER
Release all buttons after the beeps
Press CARTRIDGE once
Press RESUME

++++++++++
Canon BJC-5000
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

++++++++++

Canon BJC-5100
Self Test
Switch Printer off. Hold Power for 1 beep.

Waste Counter Reset
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

++++++++++
Canon BJC-3000 BJC-6000 BJC-6100 BJC-6200 S400 S450 F300 F600 F620
Canon
BJC-7000 BJC-7100 BJC-8000 BJ-F800 i6500

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6: Press Power to set data

++++++++++

Canon BJC-600 BJC-600e BJC-610 BJC-620
1: Unplug Power Cord
2: Hold POWER and FF and Print Mode buttons
3: Plug in Power Cord
4: Release after the beeps

++++++++++

Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70
1: Unplug Power Cord
2: Hold POWER and RESUME buttons
3: Plug in Power Cord
4: Release buttons after the printers starts up
5: Hold CARTRIDGE and RESUME
6: Press POWER
7: Release all buttons after the beeps
8: Press CARTRIDGE 16 times
9: Press RESUME
10: Unplug the Power cord


++++++++++
Canon BJ-30 BJC-35v BJC-70
F14 Error Reset
1: Unplug adapter
2: Hold POWER
3: Plug in ADAPTER
4: Release POWER after printer starts
5: Hold FF and MENU and press POWER
6: Release after beeps
7: Press <> Cartridge until 1A is displayed
8: Press ONLINE
9: Press POWER to shutoff printer
10: Unplug printer then re-plug printer

++++++++++
Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520
Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.
You are now in Service mode.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a resta


++++++++++
Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

+++++++++

Canon S900, S820, S750, S520

  1. Turn off the printer.
  2. Press and hold the RESUME button, then press and hold the POWER button.
  3. While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
  4. The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
  5. Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.

    1. Service/factory test printout, including ink sensor check
    2. EEPROM info printout
    3. EEPROM initialization
    4. Clear the waste-ink counter
    5. Printer model setting. (more selections beyond this- leave this alone)
  6. After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

++++++++++

Canon S9000

  1. Turn off printer
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Press Resume button 2 times then let BOTH buttons go.
  5. Green lights will flash and then stop blinking.
  6. When green lights are solid, press the Resume button 4 times.
  7. Press the Power button and the printer should turn off, if not, press the Power button once more.
  8. Your printer should respond as normal.

+++++++++

Canon MPC190
Reset Waste Ink
1) Enter SERVICE MODE.
By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Read More..


I Program This Simple Software For You All . Its Clean And Doesnt Have Any Virus.I Add Some Of Google Hacking Technics In My Software That Help You To Search Everything That You Want
Like Movie , Mp3 , Rapidshare Files , E-book ....You Should Try it
I Coded This Software In Vs.net So You Need .Net Framwork For Using This Software
If You Have Any Idea To Improve This Software Plz Tell Me
I Bet You will Like This Software
There Is 2 Language Help In English And Persian
Here Is Pic Of The Software

And Link Of The Software Is
http://rapidshare.com/files/2229506/Gbt12.rar

Read More..

8 cara untuk bisa.....!!

Bukan cuma pendekar Kung Fu dari Negeri Tirai Bambu seperti Wong Fei Hung, Jackie Chan, atau bahkan Stephen Chow yang punya jurus - jurus. Kita juga punya jurus - jurus, salah satunya jurus Anti Jomblo, khusus bagi yang lagi Jomblo dan Hunting. Semoga bisa bermanfaat ya…!

1. Nggak Males !
Kata ‘Males’ harus dicoret dari daftar kegiatan kamu, bahkan dari menu keseharianmu. Wajah cantik atau ganteng, belum cukup buat modal kamu untuk menarik lawan jenis kamu. Contoh yang sering kamu lihat, misal aktris Hollywood, Jessica Simpson istri seorang penyanyi Hollywood juga adri 98 Degrees Nick Lachey, dalam acara infotainment di TV Swasta. Nggak lucu khan, kalau seorang istri tidak bisa mengerjakan tugas - tugas paling sepele dirumah. Pasti akan timbul kata sebal atas perilaku demikian.Makanya jangan males untuk mengembangkan diri kita semaksimal kemampuan yang kita punya.Kalau perlu perbanyak program pengembangan diri, biar makin lihai.

2. Jangan Jadi orang JUTEK!
Menjadi orang yang ramah dan murah senyum itu banyak untungnya juga. Yang pasti kita bakal disukai oleh orang yang kita temui. Kesan pertama akan beda, dan akan selalu diingat. Sebenarnya gampang untuk jadi Cowok atau Cewek yang ramah, dengan bersikap nggak Jutek. Tapi hati - hati jangan salah mengartikan SKSDSA alias Sok Kenal Sok Deket Sok Akrab ama tiap orang dalam kesempatan yang nggak penting - penting amat. Dan satu lagi, jangan asal senyum ke semua orang kalau belum yakin bakalan nggak ada yang respon, malah bakal ngejatuhin image kita.

3. Feminim and Maskulin !
Beauty and Handsome nggak selalu identik dengan body langsing, berlekuk indah atau kulit putih, buat yang cewek, atau body atletis, bermuka macho dan dada/perut berbidang buat yang cowok;tapi lebih bagaimana kita mau appreciate atau mengahargai tubuh kita sendiri. Artinya, selain menjaga tubuh dan merawat tubuh kita dengan baik, jangan lupa mengisi jiwa dan pikiran kita dengan hal -hal yang positif dan bermanfaat. Jadi kita bisa jadi lebih enak diajak ngobrol oleh teman kita, nah inilah senjata / magnet buat merebut perhatian lawan jenis kita.

4. Tebar Jaring !
Menebar pesona juga harus dibarengin ama menebar jaring - jaring alias pukat penarik cinta. Perbanyak kesempatan bergaul kesemua lapisan dan perkumpulan. Tapi jangan ke perkumpulan yang nggak - nggak yaa… Khan banyak sekarang perkumpulan hobby kita. Tinggal pilih, lalu join ke dalam dah. Justru cinta kadang - kadang muncul dan melekat ke kita ditempat - tempat yang tidak terduga.Siapa tahu ada cowok atau cewek yang nyantol ama kita.

5. Atur Waktu kamu!
Tanpa harus melupakan aktivitas kita sehari - hari,baik masih belajar atau udah gawe, nggak ada pantangan untuk kita buat meng-update jadwal acara kita buat terjun ke tempat-tempat keramaian, seperti mal, liga olahraga, atau pagelaran teather; itu khan area pedekate bahkan berburu yang potensial. Kalau nggak sering terjun ke keramaian kapan ada cowok atau cewek yang melihat kita, atau yang iseng ngeggoda atau melihat kita tampil di depan public, emang artis aja yang bisa…?

6. Positif Think !
Ini yang terpenting dalam menjalankan keseharian, biar jomblo, tapi kudu berpikir positif. Sehingga selalu terpacu untuk terus maju dan tidak pasrah ama ke-jombloan kita. Sudah nggak jaman lagi bagi yang cewek buat diam dan menunggu diajak cowok. Berpikirlah positif,”Pasti ada yang bisa atau mau diajak jalan ma gue!”. Bagi para cowok,berpikir positif disegala hal, setelah ngelakuin no 1 sampe no 5, masa sih nggak ada cewek yang tertarik, atau mulai mendekat. Tapi inget kata ngajak jangan disalah artikan, ngajak yang dimaksud positifnya adalah memulai lebih dulu kepada lawan jenis untuk kenalan…

7. Pray, Effort and say ‘Never Give Up!’
Satu jurus sebelum pamungkas adalah Pray,Effort, and Say ‘Never Give Up!’. Bagi para jomblo, jangan berhenti berdoa, berharap dan berusaha, karena dimana kita berusaha pasti selalu ada jalan yang diberikan. Dan ‘Never Give Up!’ untuk terus mengembangkan diri, berkenalan, menambah wawasan, berpikir positif, dan mencari pasangan. Inget! berusaha tanpa didahului doa, rasanya jadi nggak ‘puguh’, kata orang Sunda.Biar gimanapun, curhat ke Tuhan lebih enak dibanding ke seseorang, bisa bocor. Jurus yang ampuh, doakanlah tipe cowok atau cewek idola kamu tiap kamu berdoa, siapa tahu akan menjadi kenyataan dan dibukakan jalan olehNya!

8. Update ke-GAPTEK-an kamu!
Nah, jurus akhir dari kami, dan mungkin agak modern dikit yaitu adalah ‘Jangan GapTek’ alias Gagap Teknologi. Seakarang ini makin banyak sarana untuk mempermudah berkomunikasi dengan orang lain. Selain teknologi hanphone atau Short Messaging Service (SMS) dan Chating, ada tempat dimana kita bisa mencari teman sebanyak mungkin dan memilih teman - teman kita. Di hampir pelosok tempat kita tinggal sudah banyak jasa rental internet atau kita sebut aja WARNET. Nah di Warnet, kita bisa buka situs yang menyediakan jas untuk bertukar obrolan dan juga gambar, salah satunya Friendster. Banyak sekali kemudahan dalam berkomunikasi didalamnya. Hanya tinggal mendaftarkan email kita, login, nah…terbuka dah gerbang komunikasi lintas negara. Jadi cobain aja yaa, siapa tahu kamu bisa ketemu dengan teman atau bahkan pasangan kamu.

Read More..